Chimney Company in Logan Square — Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price — and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Book My Appointment

Flat price quoted before we book

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Logan Square, IL

Chimney repair in Logan Square usually means working on a brick stack that’s been standing since before World War I. Most homes here were built between 1890 and 1930, and their chimneys were designed for coal furnaces, not the gas boilers and high-efficiency appliances running through them today. Wexford Chimney Sweep has served Logan Square since 2013, and we handle everything from crown rebuilds to full liner replacements. If your chimney needs attention, call (866) 361-2607 for an honest assessment.

Call (866) 361-2607

Why Logan Square Homes Are Different

Logan Square’s housing stock creates chimney problems most suburban crews never see. The neighborhood is defined by dense rows of two- and three-flat greystones and brick workers’ cottages, many with shared chimney stacks and original masonry flues that have never been relined. A single brick stack often serves two or three separate units, each with its own flue channel running up the same structure. When one flue fails, it can compromise the entire stack.

The telltale Logan Square chimney is easy to spot from the roof: a shared stack with a crumbling crown, hairline cracks running through the mortar joints, and flue tiles that shifted decades ago. Our technicians inspect each flue independently because unit 1’s liner might be intact while unit 2’s is spalling into pieces. Freeze-thaw cycles from cold, snowy winters accelerate the damage. Water seeps into brick pores, freezes, expands, and pops the surface off. After enough Chicago winters, the crown breaks down and water gets behind the brick, eating the mortar from the inside out.

Explore

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Our Main Logan Square Services

Most Logan Square homeowners call us first for one of two reasons: a chimney that hasn’t been swept in years, or a dryer vent that’s suddenly taking forever to dry a load. Here’s what those visits involve.

Chimney Sweep in Logan Square

In Logan Square, a sweep isn’t just about removing soot. The original unlined brick chimneys in these 1890s to 1920s buildings now vent gas boilers and furnaces, which means we’re checking for crumbling mortar and missing flue tiles alongside the creosote removal. Cold winters push furnaces hard for months, so buildup happens faster than homeowners expect. We sweep the flue, inspect every accessible surface, and give you a straight answer about what needs attention now versus what can wait. Full details on our sweeping process are on the Chimney Sweep in Logan Square page.

Chimney Sweep in Logan Square

Dryer Vent Cleaning in Logan Square

Lint-clogged dryer vents are a leading cause of house fires, and Logan Square’s older buildings often have long, narrow vent runs that collect lint quickly. Many two- and three-flats route dryer exhaust through shared walls or up through the roof, making access tricky for a homeowner with a brush from the hardware store. We clean the entire vent run and check for proper airflow at the termination point. It’s the same careful approach we bring to chimneys, applied to the other fire-hazard exhaust in your home. See the Dryer Vent Cleaning in Logan Square page for what’s included.

Dryer Vent Cleaning in Logan Square
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 361-2607

What happens when you call

  1. 1
    A real person answersNo phone trees — you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Chimney Repair in Logan Square

Chimney Repair in Logan Square

Repair work in Logan Square rarely means tightening a loose brick. It means rebuilding crowns on shared stacks, replacing missing flue tiles in unlined channels, and relining flues that were never built for modern gas appliances. The dense rows of 1890s – 1920s two- and three-flat greystones and brick workers’ cottages often have original unlined brick chimneys that served coal furnaces and now vent gas boilers. So most repair jobs involve not just patching but inspecting for crumbling mortar and missing flue tiles that could leak carbon monoxide into the flats above. Wexford handles the full scope of Chimney Repair work, from spot fixes to complete liner retrofits.

Chimney Cap Installation

Signs you need it

Rain water pooling in the firebox or visible rust staining on the flue wall often means the chimney has no cap, or the existing cap failed years ago.

What it costs in Logan Square

Chimney cap installation in Logan Square typically runs $250 – $600 depending on the flue size and whether a custom bracket is needed for an odd-shaped crown.

How we do it

We measure the flue opening, select a stainless or copper cap from Gelco or Famco that fits the flue dimensions, secure it to the crown with the right fasteners, and confirm the draft is unaffected.

Chimney Liner Installation

Signs you need it

Flue tile pieces accumulating in the cleanout, visible gaps between tiles during a camera inspection, or a furnace technician flagging exhaust leakage all point to liner failure.

What it costs in Logan Square

A full liner installation in Logan Square typically falls between $2,800 and $5,800, with the spread driven by flue height, accessibility from the roof, and whether scaffolding is required on a three-flat.

How we do it

We run a camera through the flue to document the damage, size a DuraFlex flexible liner to the flue dimensions, drop and secure it from the roof, and reconnect the appliance with a properly sized connector.

What Chimney Repair Costs in Logan Square

Item Typical range in Logan Square
Chimney cap installation $250 – $600
Chimney crown repair or rebuild $700 – $1,700
Chimney liner installation $2,800 – $5,800

Can you repair a chimney without rebuilding the whole stack?

Yes, in most cases. Crown rebuilds, cap replacement, tuckpointing, and liner installation all address specific failures without tearing down brick. We only recommend stack reconstruction when structural cracks run through multiple courses of brick.

Do I need a liner if my house was built before 1930?

If your Logan Square chimney still vents through original unlined brick, you almost certainly need a liner. Unlined flues leak exhaust gas through mortar joints, and modern gas appliances produce moisture that accelerates brick deterioration. A camera inspection provides definitive proof.

Brands We Service in Logan Square

We install and stand behind professional-grade product lines: DuraFlex for liner systems, Olympia Chimney and Copperfield for caps and dampers, and Famco for termination components. Parts are stocked locally, which means most cap and damper replacements don’t wait on shipping. For details on the full product line, see our brands.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Logan Square, IL

Service Typical range in Logan Square
Chimney sweeping (Level 1 inspection included) $175 – $275
Level 2 camera inspection $300 – $500
Smoke chamber parging $600 – $1,200
Chimney cap installation $250 – $600
Chimney damper replacement $300 – $700
Chimney crown repair or rebuild $700 – $1,700
Chimney flashing repair $350 – $800
Masonry tuckpointing (per section) $400 – $1,000
Chimney liner installation $2,800 – $5,800
Dryer vent cleaning $150 – $300

In Logan Square, prices get pushed up by roof access on three-flat buildings, shared chimney stacks that require extra inspection time, and the frequent need for masonry scaffolding on narrow gangways. We confirm a flat price before any work begins, and nothing gets hidden behind add-on charges.

Neighborhoods We Serve in Logan Square

We work throughout the 60647 ZIP, from the boulevard-adjacent greystones near Logan Boulevard to the workers’ cottages tucked off Milwaukee Avenue. Each pocket of the neighborhood has its own quirks, but the chimney stock is consistently old brick construction. Typical response time for the Logan Square area is 3 to 5 business days, with quicker scheduling available when a safety problem is documented.

  • Logan Boulevard historic district
  • Palmer Square area
  • Milwaukee Avenue corridor
  • Kedzie Avenue stretch
  • Belmont Gardens edge

Service Area – Cities Near Logan Square

Wexford Chimney Sweep runs crews into the surrounding neighborhoods on a regular schedule. If you’re just outside Logan Square, we cover Avondale, IL directly to the north, West Town, IL to the southeast, Belmont Cragin, IL to the west, and East Garfield Park, IL just south of the neighborhood.

Serving Logan Square, IL — Our Local Coverage Area

We’re based in the Logan Square area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Logan Square

Ready to get started? Free estimates · Written inspection reports response in Logan Square
Call (866) 361-2607

What happens when you call

  1. 1
    A real person answersNo phone trees — talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Logan Square Customers Say

★★★★★ 4.9 from 12+ reviews

"We manage six rental properties and I've now sent them to four of them. Consistent every single time, which is not something I can say about most vendors we use."

— Kurt Doyle

"Showed up when they said they would. That's most of the battle."

— Katie Parker

"Fast, fair, done right. No notes."

— Elena Vargas

How It Works in Logan Square

Getting your chimney cleaning handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning needs and we provide an upfront, transparent quote — no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Logan Square — typically within 30–60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Logan Square — we'll get back to you fast. No obligation.

By reaching out through this form, you agree to our Privacy Policy and consent to being contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch